Sort By:   GridListGallery
  • All
  • Classifieds
  • Auctions

Newest Classifieds in Barter

$10.00 USD

Spun Kevlar Aramid Fiber Gland Pump Valve Packing
 : 0 |   : 0

SpecificationsSpun Aramid Fiber PackingA tough, high performance packing, cross-plaited from tex- turised aramid yarns.GINSEAL provides different kind aramid packings as follows:Spun aramid fiber packingItem No.: JSP-AR50Braided from high quality DuPont spun Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but no harm to the shaft. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based COM- pound for quick and easy break-in.Item No.JSP-AR50Propertiesfiber materialPTFE AramidadditionsPTFElubricating agent =silicone freeyesdensity approx.(g/cm³)1.6Range of applicationstemperature min.(°C)50temperature max.(°C)260steam(°C)PH2-12pressure p (bar) rotary pumps50pressure p (bar) piston pumps100pressure p (bar) valves200speed (m/s)2ApplicationsPaints,dyes (silicone-free)×Abrasive and sticky media√Water,industrial water,seawater√Hot water,boiler feed water,condensates√Vapors,sour gases,nitrogenoOxygen×Mineral oils,animal fats√Heat transfer oils,synthetic oilsoDiluted alkali,saline solutions√Concentrated alkali×Inorganic acids diluted,saline solutions√Inorganic acids,concentrated×Solvents,other organic compoundso√ =suitable; O=Limited suitability; ×=unsuitable url:http://www.ginseals.com

$10.00 USD

Asbestos Free Jointing Sheet Millboard
 : 0 |   : 0

SpecificationsOil Resistance Non-Asbestos Sheet1--made from synthetic late fiber and rubber filling material,2—with good compressibility ,heat resistance,coeffection of resilience.It is resistant to oils, water, steam, gas, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants. GINSEAL Non-asbestos sheet has five types as follows:JSS-NA150Is Oil Resistance non-asbestosGasket sheet is on the basis of acrylic fibers, cellulose fiber and NBR rubber.General Size: Length *Width: 1270*1270mm,1270*3810mm,1500*1500mm,1500*4500mm,15 00*4000mm,1500*1350mm,1500*2000mm,1500*1000mmThick ness :1.0, 1.5, 2.0,2.5,3.0 4.0, 5.0,6.0ItemUnitJSS-NA150Identification color/overprint/Yellow/blackDensityg/cm 31.9Tensile strength ASTMF-152Mpa≥5.0Compressibility ASTMF-36%7~17Resilience ASTMF-36%≥35Compressive creep strengthN/mm 2≤35Leakage rate ASTMF-37cm 3 /s1.5×10 -2Oil resistance /      Thickness growthIRM903 oil or 3#  oil149 o C±2,5 o C h%≤10ASTM  Fuel oil  B 21 o C~30 o C,5%≤15Working Temperatureo C( o F)100~150 (212~302)Max Temperature (Instantaneous)380(716)380(716)Applicable medium :Tap water, hot water, atmosphere, weak acid, weak alkali, oil.long-term usage temperature should be 100  ~150  (212 oF  ~302 oF ). url:http://www.ginseals.com

$10.00 USD

High Temperessure Pressure Pump Outside Crocheted
 : 0 |   : 0

Outside crocheted Inconel jacket graphite packingItem no.: JPS-FG20JPS-FG20 is braided from high purity expanded graphite material(C-content >99 %) over knitted with Inconel wire. It contains a specialhigh temperature impregnation as well as a corrosion inhibitor. Due tothe high wire content it can be used without end rings.Operating rangePressure: p = 450 barSliding velocity: vg = 2 m/sTemperature: t = -200 °C ... +450 °C,-200 °C ... +650 °C (steam)Chemical resistance: pH = 1 ... 14 url:http://www.ginseals.com

$10.00 USD

Double Knives Cutting Machine
 : 0 |   : 0

SpecificationsDouble Knives Cutting MachineDouble knives cutting machineItem No.: JSM-CU10Cutting the rubber gaskets inside diameter & outerside diameter together at the same timeWork range: 20mm ~ 2500mmVoltage: ~380VPower: 0.75KWNet weight: 150KGDimension: 90× 55× 87CM url:http://www.ginseals.com

$10.00 USD

Carbonized PTFE Packing Impregnated In Graphite
 : 0 |   : 0

SpecificationsCarbonized PTFE Packing Impregnated in GraphiteCarbonized fiber packing is manufactured by heating poly- acrylonitrile fiber into carbonized fiber. GINSEAL Carbon fiber packing has three types as follows:Carbonized PTFE packing impregnated in graphiteItem No.: JSP-CB10Carbon fiber packing with graphite is woven of strong carbon fiberAfter softening treatment and impregnation with mixture latex of fine graphite powder, PTFE dispersion and lubricant. It is chemical resistant, heat conductive and with high strength, so this item is widely used with revolving and reciprocating pumps in which chemical corrosive media and particle grains exist. It's the best sealing material for high pressure a, high temperature and corrosion.Item No.JSP-CB10Propertiesfiber materialcarbonadditionsgraphitelubricating agent =silicone freeyesdensity approx.(g/cm³)1.2Range of applicationstemperature min.(°C)160temperature max.(°C)400steam(°C)500PH0-14pressure p (bar) rotary pumps20pressure p (bar) piston pumpspressure p (bar) valvesspeed (m/s)2ApplicationsPaints,dyes (silicone-free)oAbrasive and sticky media×Water,industrial water,seawater√Hot water,boiler feed water,condensatesoVapors,sour gases,nitrogen√Oxygen×Mineral oils,animal fats√Heat transfer oils,synthetic oils√Diluted alkali,saline solutionsoConcentrated alkali×Inorganic acids diluted,saline solutionsoInorganic acids,concentrated×Solvents,other organic compoundso√=suitable; O=Limited suitability; ×=unsuitable url:http://www.ginseals.com

$10.00 USD

Ceramic Glassfiber Heat Resistant Material
 : 0 |   : 0

Heat Resistant MaterialItem No.: JSA-HM10HEAT RESISTANT MATERIALS FOR FIREPLACES & STOVESFeatureHeat resistant products for fireplaces and stoves are manyand varied, made to suit specific conditions. The productsneeded vary based on whether the application is an openfire, free standing stove, or cassette fireplace.Ceramic fiber is a lightweight insulating product. It has lowthermal mass, which means that it does not retain heat, lowthermal conductivity and is an extremely effective insulationmaterial. Its high thermal shock resistance makes it suitablefor applications where traditional refractories cannot beused. Ceramic fiber is available in many forms and densitiesincluding:ROPES, TAPES & TEXTILES ISULATIONThermal Ropes and TextilesCeramic Fiber and Glass Fiber Ropes, Tapes and Textiles.Maximum Temperatures in Service:Ceramic Fiber 1260°C /2300°FInconel Wire 1100°C /2000°FGlass Fiber 550°C /1020°FMaterial Available.YarnThis is the starting point for all of the other materials. It ismade from Ceramic Fiber or Glass Fiber and optionally canbe reinforced with inconel wire.ClothThis material is woven from Ceramic Fiber Yarn reinforcedeither with inconel wire or glass fiber.Knitted RopesThese are made from twisted or pre-twisted strands ofceramic fiber (reinforced either with inconel wire or glassfiber) or from glass fiber. The hard ropes are composed ofthree pre-twisted strands, which are themselves knitted toform the rope. The soft ropes are knitted directly from theyarn, which gives a more easily compressible seal.LaggingRope Lagging consists of a central core of ceramic fiber orglass fiber held together by an outer braid of glass fiber.Tape and Ladder TapeTapes and Ladder Tapes are woven from ceramic fiber(reinforced either with inconel wire or glass fiber) or fromglass fiber.Other material like glass fiber, asbestos, carbonizedmaterials are also upon request. url:http://www.ginseals.com

$10.00 USD

Semi-automatic Horizontal Big Size Winder
 : 0 |   : 0

SpecificationsSemi-Automatic Horizontal Big Size WinderSemi-automatic horizontal big size winderItem No.: JSM-WD11It is for SWGs' filler (Sealing Element), horizontal type Voltage: ~380VPower: 0.4KWNet. Weight: 300 kgsWork range: 250mm ~ 2500mm Dimension: 116*76*102CM url:http://www.ginseals.com

$10.00 USD

Duplex H Type Spiral Wound Gasket For Heat Exchang
 : 0 |   : 0

SpecificationsSpiral wound gaskets - H TypeDescriptionGinseal heat exchanger spiral wound gaskets are created for heat exchangers, It’s same with common spiral wound gaskets in structural type except that barrettes(bar) are required. Always the barrettes are always double jacketed type or kammprofile type. . H Type Spiral Wound Gasket:Item no.: JSG - SWHSpiral Wound Gasket for heat exchanger.For example: SS304/FG with 1 bar of Double Jacketed.Material for rings:Low Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium , Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium (see more information in our products catalogue)How to choose FillerThe important part is the sealing element (also called filler) made up of V-formed SS strip and non- metallic filling tape, the material can be changed according to different chemical compatibility requirements.Graphite filling strip is good to be used in high temperature environment,PTFE filling strip is for acids and other corrosive mediumsNon-asbestos’ use is increased when the health problems with asbestos became known. But it’s only recommended for low temperature less severe applications due to the rubber content.Ceramic is in extremely high temperature applications. The filler is not so common as it cannot achieve the same leak tightness as graphiteMarking (standard):Marking on outer ring:- Manufacturer- Nominal Size - Pressure Range- Winding material + Filler Material- Manufactured to (standard)For example: GINSEAL 2"150# SS304/SS304+F.G./CS ASME B16.20SpecificationsWe deliver according to the following standards: ASME B16.20, ASME B16.47 Series A & Series B, ANSI B16.5, BS1560, BS EN1092, DIN, JIS, etc.How to order1 -- Nominal pipe size or specific gasket dimensions2 -- Pressure rating3 -- winding and filler materials4 -- centering / outer ring or inner ring materialFurther materials available upon request url:http://www.ginseals.com

$10.00 USD

Valqua Vendor's Ss304 Groove Kammprofile Gasket Wi
 : 0 |   : 0

SpecificationsGinseal Kammprofile Gaskets - Grooved Gasket - Loose Outer Circle TypeGINSEAL kammprofile gasket (also known as serrated gasket) is made up of serrated metal core with a soft facing material. The flat metal core is machined on each contact face with concentric serrations. It is the preferred design when improved performance at low seating stresses is needed.Loose Outer Ring TypeItem No.: JSG-KM12,loose outer ring type is regarded as a problem solver for heat exchanger,large vessels and equipmentCore designStandard core design is parallel which offers the advantages of even stress distribution across the gasket face. Convex core is a reduced depth of the grooves towards the profile centre, ensuring a high seating stress in the middle of the core and is effective for low bolt load applicationsCore thickness is usually 3.0 mm (0.125") (nominal); Other thicknesses and materials are availableStandard facing thickness is 0.5 mm (0.020"); Other thicknesses and materials are availableCore MaterialLow Carbon Steel, SS304, 304L, SS316, SS316L, SS321, SS347, SS 410, Aluminium , Copper, Brass, Nickel 200, Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium (see more information in our products catalogue)Layer MaterialFlexible Graphite, PTFE, EPTFE, Non-asbestos, Silver (see more information in our products catalogue)Marking (standard):Marking on outer ring:- Manufacturer- Nominal Size - Pressure Range- Core Material + Filler Material- Manufactured to (standard) url:http://www.ginseals.com


Newest Auctions in Barter

Sorry! There are no "auctions" currently listed in this category. Please check back soon!