Sort By:   GridListGallery
  • All
  • Classifieds
  • Auctions

Newest Classifieds in Barter

$10.00 USD

TM-AG900 High Quality Automatic Glitter Powder Coa
 : 1 |   : 0

Tamprinter glitter powder machineThe operating principle is:The first printed pattern, Before the ink is not dried, dusting Excess powder not stick on ink, Shake down Dried Gold glitterlike this videohttp://v.youku.com/v_show/id_XNTY0ODU4MDg0.ht mlTechnical parameter:Commodity nameAutomatic gold powder machinePower220V/2KWConveyor belt width (mm)920mmPaper thicknessmore than 80gDimensions2100X1200X1650mmWeight350kgDusting width900mmApplication:It is apply to the color powder spraying of the greeting cards, textile, vanities, leather, etc.Feature:  An after-printing machine instead of traditional hand glitter powder printing; easy use; non-dusting; used with screen printing machine can increase efficiency greatly, increase the use rate of glitter powder; make various pictures with glitter powder.If necessary, connect to UV light curing unit and infrared-ray dryer, etc.Key components, such as conveyer belt, blower, transducer are imported from advanced technology country, so that the machine will be more steady and durable.Stick gold powder, Use white glue will be cheaper than the uv glue, but be sucked particles clog the suction inlet, need to often clean  the suction inlet.Automatic Powder Spraying Machine is a post-press equipment to replace traditional color power managed by hand, applicable for spot power glittering, surface bulging with power and similar color power finishing atts of poster, card, painting and film. The core parts such as conveyer belt, ventilator and frequency converter are all imported. Whole adjusted operated, it is easy to operate and is easy to be connected to drying/UV drying equipments.Advantage:1, Speed adjustable, Efficient, Powder spray and powder collection at the same time.2,Incease the Utilization of glitter, maximum save your cost3, without dust polution, more health to factory staff4,easily to be connected with glue machine, screen printing machine, drying, UV curing machine etc.5, ......url:http://www.screenprinterfactory.com

$10.00 USD

TAM-90-1 Book Cover Hot Foil Stamping Machine On P
 : 1 |   : 0

Technical Parameter:NamePneumatic Plane Hot stamping machineModelTAM-90-1Product thickness250mmImpression area80X110mm (3.1"X4.3")Power220V/50HzElectrothermal Power500WAir Pressure0.5-0.7OperationPneumaticSystem controlautomaticWorkbenchcan be adjustedStamping foil winding lengthless than 120 mmStamping speed800 PCS/HrDimensions400X430X750mmMachine Weight51KGApplication:This hot stamping machine is fit for stamping on the surface of plane objects with small area. With fast speed and low energy consumption. Mainly applied to the field of craft, fabric handbag, leather, paper and plastic.Characteristics: 1. Stamping temperature adjustable range from room temperature to 400degree.  2. Stamping pressure is adjustable to install.  3. Automatic rear-and-front worktable ensures safe and quick operation.  4. Worktable capable of slight adjustment to rear-and-front, left-and-right and rotation.  5. The height of the stamping head adjustable accordingly.  6. Automatic foil feeding and rolling with adjustable function.ItemDescriptionUnit PriceUSDQtysetAmountUSD2mm*3mm*H15mmSmall caps character A~Z (26*1pcs)* 1 group$0.596$48a~z (26*1pcs)* 1 group0~9 (10*1pcs)* 4 group+ - / @ (4 *1pcs)* 1 group50px highlarge format charactersA~Z (26*1pcs)*1 group$1566$990a~z (26*1pcs)*1 group0~9 10*1pcs*1 group+ - / @ 4*1pcsCharacter Jig$301freeCharacter Jig $301$30Professional tape1. Resistant 350°C Temperature2. 0.3m * 10 M$2501$250TAM 680 stamping foilroll slitter1.Max cutting length:680mm2.Max cutting diameter:150mm3.Inner paper core diameter:25-27mm4.Motor:0.37KW/220V5.Weight:40kg6.Dimensions:9 60X350X550mm8. Machine Weight: 40KG$3801$380AL base silicone Plate300mm*600mm*4.5mm(3mm silicone + 1.5mm aluminium )$714$284300mm*600mm*6.5mm(5mm silicone + 1.5mm aluminium )$1024$408Rubber stamp making machineMachine size:80*43*550pxWork area :19*175px1--------------without coating paint metal2-------------Metal can not be oxidizedalso Can not be eng......url:http://www.screenprinterfactory.com

$10.00 USD

TM-UV750L Glass With UV Glue Bonding UV Curing Mac
 : 1 |   : 0

Technical ParametersModel No.TM-UV750LConveyor belt width(mm)750mmUV light power(kw)5.6kw*2Conveyor speed(m/min)0-25m/minPower (v/kw)380/12.5Dimensions(L*W*H mm)4050*1050*1400mmPlywood4.2*1.2*1.6 m 8.1CBMWeight350kgApplication:It is apply to the special effects such as wrinkle, frosted refraction gem crystal and convex oil on the bullion paperboard, metal, glass, plastic, and also the UV curing of the offset printing ink on the offset press production.Features:1,The imported Teflon mesh belt conveyor, it is enjoying precise production, smooth running , and restful.2, The speed of conveyor is adjustable. It can be adjusted any reasonable speed you need.3, Precise and imported spotlight, high reflective lampshade, quick drying.4,The illuminating height of UV shade is also adjustable.5, The operating current of UV lamp is showed outside so as to control the working status.6, There is a heat-extraction system to keep a high-efficiency working environment .Content1 Safety instruction    ----------------------------------4 1.1 Safety regulation    ---------------------------------4 1.2 Warning signs (figure/photo)    ----------------------6 1.3 The interpretation of signs    -----------------------8 2 Specification    ---------------------------------------8 2.1 Machine function and feature    ----------------------8 2.2 Machine's model and nameplate    ---------------------9 2.3 Specification table    -------------------------------9 2.4 Machine noise value    -------------------------------11 2.5 Main parts(figure)    ------------------------------11 2.6 Machine dimension(figure)    -----------------------13 2.7 Circuit diagram (the same: UV750、UV1000、UV1200)----13 3 Installation    ----------------------------------------15 3.1 Transit safety item    -------------------------------15 3.2 Transit method    ------------------------------------15 3.3 Installing place selection    ------------------------16 3.4 Installation......url:http://www.screenprinterfact ory.com

$10.00 USD

TAM-320-H Strong Semi Hydraulic Pressure Hot Stamp
 : 1 |   : 0

Technical parameters: Video:http://v.youku.com/v_show/id_XO TMwOTk4Mzk2.htmlTypeTAM-320-H hydraulic pressureTAM-320-1 PneumaticTAM-320 PneumaticPower380V 50HZ 220V 50HZ 220V 50HZ Heating power3KW2KW1KWStamping area460 * 260mm460 * 260mm320X180mmMax product H200mm200mm200~350mmadjustableBerth length0-500mm roll 0-500mm roll 0-500mm roll Temperature range 0-300 ℃0-300 ℃0-300 ℃Foil paper bore16-25mm 16-25mm 16-25mm Working pressure4Mpa(about 2000~3000kg)1500~2000Kg500KgCylinder160*130*130*50 100*130*130*50Cylinder stroke100mm 150mm 100mm Dimensions1050*840*1910 mm 1050*840*1910mm820*710*1510mmWeight400kg 347k g 202.5kgAir compressor2-3P2-3PGas storage capacity60 liters60 litersPrice$4666$3666$2166Application: Pair of leather products, rubber products, technology products, plastic products, wood, paper and other surface bronzing, indentation, mark.Features:1, This series of stamping machine adopts hydraulic principles of design automation,  Send, receive paper with motor transmission,  2,Tape length can be arbitrarily controlled. 3, Laminated stroke is high, suitable for larger thicker workpieces.  url:http://www.screenprinterfactory.com

$10.00 USD

TM-IR1000 High Quality Drying Conveyer Industry Sh
 : 1 |   : 0

TM-IR1000 High Quality Drying conveyer Industry sheet infrared dryer tunnel ovenTechnical ParametersConveyer width1200mmTotal wattage55KWWind fan wattage45W/220V*2Conveyer motor wattage90W/1P/220VConveyer speed0~25m/minSpeed adjustmentStep lessU Heater Lamp wattage1.5Kw/220V×6pcsMax height of production100mmTotal Length15m, Heat length: 12mEntering length2.5m Exit elngth:0 .5mThe raw material can be spread on the conveyor belt through suitable auxiliary mechanism such as distributor, vibrating belt, pulverizer of granulator. The convey or passes one cannel or several channels consisting of heating unit. Each heating unit is equipped with air heating and circle system. Each channel has one or several damp exhaust system. When the conveyor passes it, hot air passes through raw material from up to low or against. In this way it makes raw material dry uniformly.TechnologyInfrared (IR) is a part of electromagnetic spectrum ranging from 0.76μm to 1000μm and lies just beyond red color of visible light. Infrared is invisible. However it has properties similar to light i.e. it travels at the speed of light, it can be directed or focused and it travels very well even in vacuum.When IR radiation is absorbed by an object, heat is generated internally in the object as IR causes the atom of the object to vibrate, raising its temperature. IR does not need any medium like air or water to heat a substance. Tamprinter Infrared Convection dryer ( MW )1 medium-wave infrared light tubes imported radiant heating furnace used in all mirror panel production, with special reflector tube light , can be 100% of all light reflection to the surface.2. using a uniform temperature of the inner loop hair exclusive special duct temperature is very uniform.3 equipped with imported light pipe dedicated controller, the frequency of light waves even control, the light pipe 100% to play full-wave energy, using current stable of 100% energy saving effect.......url:http://www.screenprinterfactory.c om

$10.00 USD

TM-UV1200L UV Dryer UV Tunnel For UV Ink Screen Pr
 : 1 |   : 0

Technical ParametersTYPETM-UV1200LConvey belt width(mm)1180Effective range (mm)1200Max thickness of cured (mm)40Conveying speed (m)2~20POWER  (P/V/Hz)3/380/50UV lamp  (KW/2pcs)2pcs*5.6kwDriving power  (W)120Total power  (KW)17SIZE  (L*W*H mm)4150*1460*1600WEIGHT (Kg)580ApplicationUV Light Tunnel Dryer is  for variety of screen printing, pad printing and spraying thermosetting ink processing such as heat press, electric products, ( silicon, electric membrane film key press, window glass. ) This conveyor dryer is widely used in the drying of screen printing industry, is especially suitable for solidifying heat-set and special type of printing ink. This tunnel dryer enables the production of printed products with good colorfastness, high flexibility and high gloss.Function and feature1, Well-designed cooling system reduces the heat generated by the light source, so as to avoid high temperature leaving some products (such as paper, PVC film) affected and deformed.2, Electronic variable speed, speed is stable, sensitivity is adjustable.3, High quality light source, long operating life, it can start instantly and access to normal brightness quickly.4, Good stability and good environmental adaptability. During the use, energy output evenly, and after the prolonged uses, there is no significant change in the spectral distribution.5, Strong exhaust pump makes the article adsorbed on the conveyor belt, and difficult to drift and fall. url:http://www.screenprinterfactory.com

$10.00 USD

TMP-6090 High Quality CE Oblique Arm Type Flat Scr
 : 1 |   : 0

TMP-6090 high quality CE Oblique arm type flat screen printervideo link:http://youtu.be/6td6Oee9q-Qyouku videohttp://v.youku.com/v_show/id_XNTY0ODU 4MDg0.html1. Technical Parameter:Model No.TMP-6090Size of printing table (mm)720X1000Max printing area (mm)600X900Max network installation (mm)900X1200Min network installation (mm)450X550Substrate thickness (mm)0-20  0-50Printing speed (pcs/h)500-1200Working pressure(Mpa)0.3-0.5Air consumption(0.6Mpa)(L/pc)13/pcsThe minimum height of the table(Relative to the ground)mm820Dimensions(LXWXH)mm1550X1100X130 0weight410voltage220V 50Hzpower2.32. Application Flat Screen Printer of this series is widely used in the packaging industry (cigarette packaging, wine packaging, gift packaging and other card paper printing) trademark, calendar, oil painting, computer keyboards, paintings, iron-on transfers, credit cards, stickers, printing; also suitable for the printing of the electronics industry. 3. Performance characteristics(1). Printing machine is driven by motor drive, which is belt drive, sensitive, balanced speed, speed adjustable. (2). Oblique arm lifting motor, frequency control, the machine runs smoothly.(3). Blade and back blade pressure regulating device, and can be adjusted to the thickness and size of printing. (4). Vacuum adsorption fixed printing pieces. (5). The printing plate has up and down, left and right, before and after tuning device, which makes it  works accurate and convenient on board. (6). Equipped with a safety device so that the oblique arm is stopped in an upper position having a reliable security. (7). Electronic control unit centralized control by the microcomputer controller, the whole operation more simple, flexible, and easy maintenance. About company:Tamprinter printing machinery group limited is one of the most professional plastic printing machine supplier in China. We have supplied OEM service for the domestic counterparts since 2003. OEM products ......url:http://www.screenprinterfactory.com

$10.00 USD

TMEP-4050 Cliche UV Exposure Machine With Vacuum
 : 1 |   : 0

TMEP-4050 cliche UV exposure machine with vacuumhttp://v.youku.com/v_show/id_XNjM0NzQ1MDk2.h tmlDescriptionThis machine is new launched model based on customer’s requirements, with compact structure, computer control, data displaying, parameter storage, intelligent design, ease of operation and quick to exposure.Technical ParametersDiazo film exposure times as long as the 380S~600s will be able to meet the requirementslamp F40W/T10/154 1200MM dia32mm 2500lmTMEP-4050 UV Exposure Unit For Pad PlateWorking table type10mm High transmittance GlassLamp coverStainless steel reflection cover, automatically doorMax Exposure Area500×400mmMax frame size450×350mmLamp wattage220V, 15W*8Vacuum degree≥-0.025Dimension680*660*240mm30kgPlate typePad plate, ZN-Plate, Cooperplate, Polymer plate, screen frameApplicationA low cost and convenient exposure unit for pad stencil exposure. It can be applied for thick steel plate, thin steel plate and photo-polymer plate image, screen frame, etc. The built-in digital timer provides excellent exposure timing control. With vacuum and rubber to ensure well exposure condition. Features1, UV curing lamp in two ways: (UV mercury lamps) UV curing lamps generally contain mercury wavelengths (250-420) peak 365nm. UVLED curing lamps, light emitting diodes have peak 395,365,385,375. 2, the exposure lamp containing gallium iodide wavelength (350nm-450nm), peak 417nm. Application of two light sources are not the same industry, a mercury lamp UV curing UV inks UV glue; exposure lamp is mainly used in the PS plate exposure, non-silver films, diazonium salt film, dry film solder mask, wet film, green solder resist , liquid photosensitive solder resist, screen, film, resin version, PCM diazo film and other photosensitive material exposure.Our ServicesQuality guarantee & Service 1. Each machine is manufactured by professional experienced staff. 2. Production process is under strict supervision and adopts China an......url:http://www.screenprinterfactory.com

$10.00 USD

TM-IR6000 26kw White Quartz Heating Tube IR Heater
 : 1 |   : 0

TM-IR6000 26kw White quartz heating tube IR Heater Drying Tunnel ovenSpecification: Temperature rangeNormal~200degreeworking powerAC 110V/220V 50Hz constant temperature5degree more or less temperature resolution1 degreemachine size6000X800X1200mm Oven size4000X800X450mmIR area4000mmEnergy-saving heatingshortwave NIRConveyor drive motor 11. 26pcs 1kw White quartz heating tube2. 2 constant temperature motors3. 1KW White quartz heating tube life :5000h4. conversion rate of electrical energy into heat : 95%5. quartz heating tube 1-2 seconds to reach 100% heat output and rapid coolingChina supply of IR Drying Tunnel  TAM-IR6000 1. Drying machine with infrared ray, drying oven and tunnel2. Customized size depends on customer's demand 3. Nice design Description: Drying tunnel for variety of screen printing, pad printing and spraying thermosetting ink processing such as heat press, electric products, ( silicone, electric membrane film key press, window glass. )This conveyor dryer is widely used in the drying of screen printing industry, is especially suitable for solidifying heat-set and special type of printing ink. This  tunnel dryer enables the production of printed products with good colorfastness, high flexibility and high gloss.FAQQ: Are you a factory or a trading company?A: We are factory manufacturing packaging machines and we provide perfect OEM and after-sale service.Q: Can you send me the video to show how the machine works?A: Certainly, we have made video of every machine and uploaded them to Youtube. Q: What should I take care when using the machine?A: Keep the machine away from thinner and other chemical liquid.Q: How to maintain the machine?A: Check the connection part and clean the screen frame regularly.Q: How can I pay my order?A: We accept T/T, Western Union.Q: Do you have a CE certificate?A: For every model of machine, it has a CE certificate. url:http://www.screenprinterfactory.com

$10.00 USD

TAM-358 Manual Handbag Embossing Briefcase Hot Foi
 : 1 |   : 0

Technical Parameters: Video:http://youtu.be/8v_z0V6j0KUMode lTAM-358TAM-358-A4 embossing machineProduct shapePlanePlaneImpression area300X150mm (11.8" X 5.9")A4 Power220V220VElectrothermal Power1000W1000WOperationsemiauto(60degree-400degree)semiauto(60degree-400degree)Stamping speed700 PCS/H700 PCS/HPrint head300X150mm297X210mm(A4)Worktable350X320mm35 0X320mmPressure2000 kg2000 kgMax. product thickness190mm190mmMachine Weight146KG150KGMachine Outline Dimensions620X580X770mm/68*66*82620X580X770mm/68*6 6*82Volume0.9CBM0.9CBMLead Time6 days after payment6 days after paymentSKU50 SET50 SETPackingplywood caseplywood caseGross Weight180KG190KGPayment TermsTT/Western UnionTT/Western UnionApplication:Application area: papers, shoes, leather, handbag , PVC card, books, plastic parts.This hot stamping machine is fit for stamping on the surface of plane objectsFeatures:1. Semi-auto stamping, auto foil feeding, without compressed air, leads to easy operation. 2. Stamping temperature adjustable.3. The height of the stamping head adjustable accordingly.4. Automatic foil feeding and rolling with adjustable function.5. The mechanism to transmit printing ribbon uses motor reduction gear with its length being properly controlled.6. Horizontal sliding print bed - for accurate product placement. 7. Variable motorized auto foil feed - for minimal waste and effort. 8. Flat heating element - for efficient heat transfer. Micro-adjustable pressure - for the ultimate in convenience and versatility.Want to know difference between TAM-310-1 and TAM- 358:1, the structure of the different heatTAM-310-1 hot plate is installed heating pipesTAM-358 is an integrated whole plate heating apparatus have done on the inside2, stamping head structureTAM-310-1 is a screw hangingTAM-358 is locked flange screws3, the sliderTAM-310-1 activity table, drawing no slide instabilitySteady TAM-358-type table4, the pressureTAM-358 maximum pressure in the manual series, ......url:http://www.screenprinterfactory.com


Newest Auctions in Barter

Sorry! There are no "auctions" currently listed in this category. Please check back soon!