Sort By:   GridListGallery
  • All
  • Classifieds
  • Auctions

Newest Classifieds in Barter

$10.00 USD

Automatic Steel PPGI PPGL Aluminum Steel Roof Pane
 : 0 |   : 0

Steel Roof Panel Roll Forming MachineFeatures of Steel Roof Panel Roll Forming Machine1.Manual Decoiler or Hydraulic Decoiler with Break is equipped optional for roll forming production.2.Manual Roller Shearer before Roll Forming is the essential for roll forming production, and length control is set on touchable screen, so that material is calculated by PLC for each material thickness and color production.3.Refine steel plates in 22 mm as Sidewall of machine is used.4.14 – 20 Nos of Rollers is used for roll forming, ensuring profile strength.5.Mitsubishi (Japan) PLC and 5.7' Touchable Screen are used for for data processing and setting.6.Roll forming speed is 0 – 40meters / minute. Parameters of Steel Roof Panel Roll Forming Machine(1)Suitable Material: PPGI Coil(2)Material Width: 1000 / 1250 mm(3)Material Thickness: 0.40 -- 0.80 mmProduction Process of Steel Roof Panel Roll Forming Machinedecoiling – manual shearing – roll forming – cut-off after sizing – final wall panelComposition of Steel Roof Panel Roll Forming Machine1.5 – 8 tons hydraulic decoiler: 1250 mm width; Ø 500 – 600 mm inner diameter; 2.0 kw2.Manual shearing device before material feeding: PLC calculating and controlling, material saved, no wasted; roller cutter3.Roll forming machine: 14 – 20 Nos roller station; Ø 80 mm main shaft; 22 mm machine sidewall thickness; 0 – 20 meters / minute4.Hydraulic cutting-off: Gr12 steel blade; 20 tons working table pressure; with fan-cooler; 4 kw5.Simple run-out table: 4 pieces, in 8# channel steel6.PLC controller: Mitsubishi PLC; 5.7" Mitsubishi touchable screen; Japanese frequency converter; Schneider electronic components Pictures of Steel Roof Panel Roll Forming Machine  Certificates Exihibitions Customers visit After sales service of metal roof tile roll forming machine:1).Engineer will give free training lessons to labors in buyer’s factory.2).The Buyer will buy the round-trip air ticket for Engineer if visa a......url:http://www.roll-formingmachine.net

$10.00 USD

South Africa IBR roof tile molding machine Double
 : 0 |   : 0

Working flow of IBR roof tile roll forming machineDecoiler---feeding---roll forming---hydraulic cut to length---output tableThe profile drawing of IBR roof tile roll forming machineCharacter of main structure1.The structure is H beam base with steel plate welded stand which is very strong and good performance.2.All the components of machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.3.We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming.4.It is very easy to install the equipment and suitable for producing in the factory.5.Low noise with high efficiency.Photos for reference of IBR roof tile roll forming machineCertificatesExhibitionAfter sales service:1).Engineer will give free training lessons to labors in buyer’s factory.2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. 3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.  url:http://www.roll-formingmachine.net

$10.00 USD

Thin Sheet Cut To Length Machine
 : 0 |   : 0

Main specification of the Thin Sheet Cut To Length Machine: Cut to length for Thin Sheet Cut To Length Machine  5 tons hydraulic decoiler     ● Single arm to put the coil     ● Expanding Range: Φ460~Φ520mm     ● Capacity:5 Ton     ● Max width for coil: 1300mm     ● Power of hydraulic station: 3KW     ● The motor power : 5.5KW     ● Hydraulic pressure: 16Mpa     ● Material of shaft: Gcr45 steel     ● Size of decoiler: About (H*L*W)1.8M*2.5M*1.2M     ● Weight of equipment: About 3Ton Working flow of the Thin Sheet Cut To Length Machine: Decoiler--guiding--transmission--leveling--transmission--output table CertificatesExhibition After sales service:     1).Engineer will give free training lessons to labors in buyer’s factory.     2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.      3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.     4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.     5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.  url:http://www.roll-formingmachine.net

$10.00 USD

High Frequency Welded Pipe Production Line
 : 0 |   : 0

Brief Introduction of the Line Φ60High-Frequency Welded Pipe Production Line is able to produce welded pipes ofΦ17~Φ60mm in diameter and 0.7~3.0mm in thickness. Correspondingly, the Line can also produce all kinds of profile pipes, like square/rectangular/oval pipes and other shapes of pipes. Adopting roll pass design, the production line can manufacture welded steel pipes with good quality machining and high precision assembling.Main Specification of the High Frequency Welded Pipe Production Line 1)Material: carbon steel strips, low carbon steel, low alloy constructional steelMaterial Specification1Mechanical PropertiesTS (σb)≤520Mpa   YS (σs)≤340MPa2Strip Width50~200mm3Strip Thickness0.7~3.2mm4Inner Diameter of Coils:Φ480~φ520mm5Outer Diameter of Coilsφ1000~φ1600mm6Coil Weight≤2T2)Finished Pipes: Steel PipePipe Specification1Round Pipe DiameterΦ15~φ63mm2Square Pipes15×15mm~35×35mm3Rectangular Pipes20×10mm~30×40mm4Wall Thickness of Pipes0.7~3.2mmSquare/Rectangular Pipe≤2.5mm)5Pipe-cutting Precision0~6mm3)Power, Water & Air Supply 1        PowerPower Volume of the LineApprox. 400KWPower SourceDepends on requier 2Circulation cooling      waterFlow20T/h~30 T/hPool Volume30m3   3  Compressed AirFlow2m3/minPressure5~8kg/ cm24 ) Forming Speed:20~80m/min Workshop: 6m wide, 60m long, at least 5m high from Ceiling Rails to Ground.Production Process of the High Frequency Welded Pipe Production Line Coil Loading → Uncoiling→ Accumulator → Forming, HF welding, Debarring, Cooling, Sizing, Straightening →cutting saw →Transmitting → Packing → Storage  CertificatesExhibition After sales service:     1).Engineer will give free training lessons to labors in buyer’s factory.     2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.     3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.     4).......url:http://www.roll-formingmachine.net

$10.00 USD

Goods Shelf Roll Forming Machine
 : 0 |   : 0

The profile drawing of goods shelf roll forming machineThe thickness of Material: 1.5-2.5mm goods shelf roll forming machine Working flow: uncoiler—Leveling—Punching--roll forming--- hydraulic cut to length—output table  Main Specification of goods shelf roll forming machine  1) Main roll forming system  Main motor power: 18.5kw  Drive: Double Chain 1.2"  Main shaft dia: ¢76mm   material: 45﹟forge steel and quenched  Roller material: Gcr5 bearing steel and quench treatment 58-62, chrome coated 0.05mm  Roll station:18 groups  Raw material: 1.5mm  Working speed: 0m--15m/min(include Punching time)  Coder: Omron  PLC: YASKAWA, made in Japan. 380V 50HZ  Computer operating panel: touching screen 5) Motor punching and hydraulic cutting  Hydraulic power: 5.5KW  Material of punching mould and cutting blade: Cr12,quenched 58°-62°  Working pressure:20mpa  Punching motor: 5.5KW  Punching frequency: 50/min  Power of Servo motor: 2.2KWEquipment list for: NO.ProductQuant.15T Manual uncoiler12Separate Motor punching machine13Main Roll forming(cutting, PLC computer, Hydraulic system)14Output table(Freely)2Detailed information Terms of payment: 30%T/T ,Balance to be paid before shipping after inspection Deliver time: 60days after get 30% down payment Warranty: 1 year warranty from date of shipment Guarantee for goods shelf roll forming machine:    ● Engineer will give free training lessons to labors in buyer’s factory.    ● The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD50 for engineer.    ● During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.    ● We will......url:http://www.roll-formingmachine.net

$10.00 USD

Barrier Roll Forming Machine For Highway
 : 0 |   : 0

The profile drawing for Barrier Roll Forming Machine for Highway The thickness of Material: 3.0-4.0mm  Working flow: Hydraulic uncoiler—Feeding—Leveling-- hydraulic punching—Roll forming—Hydraulic cutting—output table  Character of main structure    a) The structure of the Barrier Roll Forming Machine is very strong and the appearance of the machine is beautiful because we adopt the H beam base with cast iron station for roll forming system    b) All the components of Barrier Roll Forming Machine for Highway are from brand-famous enterprise so that they ensure the machine normal function very effectively.    c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming .    d) The  Barrier Roll Forming Machine for Highway is very easy to install the equipment and suitable for producing in the factory.    e) Low noise with high efficiencyMain Specification of the Barrier Roll Forming Machine for Highway    A. 5T hydraulic decoiler    1) Capacity: 5ton    2) Loading width: MAX 800mm    3) Valid expanding range for coil inner diameter: 480~520mm    4) Motor power: 5.5KW    5) Hydraulic power: 4KW    B. Main roll forming system for Barrier Roll Forming Machine for Highway    1) Main motor power: 37kw    2) Separate motor reducer: 750 type    3) Punching: Hydraulic pre-punching before forming,    4) Punching mould:Cr12mov,quenched 58°~62°    5) Hydraulic power: 7.5KW    6) Roller material:Gcr15 bearing steel and quench treatment hardness 58°~62°, chrome coated         0.05mm    7) Leveling rollers: 7rollers(three upper and four lower)    8) Roll forming station: 16groups    9) Diameter of main shaft: 100mm    10) Drive: Gearbox with cardan shaft    11) Raw material: Black steel or galvanized steel    12) Thickness of Raw material: 3.0-4.0mm    13) Working speed: 8m--15m/min(Exclude cutting time)    14) Length To......url:http://www.roll-formingmachine.net

$10.00 USD

Top Quality Highway Guardrail Forming Machine
 : 0 |   : 0

The profile drawing of the Highway Guardrail Forming Machine The thickness of Material: 3.0-4.0mm   Working flow: Hydraulic uncoiler—Feeding—Leveling-- hydraulic punching—Roll forming—Hydraulic cutting—output table   Character of main structure    a) The structureof the Highway Guardrail Forming Machine is very strong and the appearance of the Highway Guardrail Forming Machine is beautiful because we adopt the H beam base with cast iron station for roll forming system    b) All the components of Highway Guardrail Forming Machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.    c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming .    d) Highway Guardrail Forming Machine is very easy to install the equipment and suitable for producing in the factory.    e) Low noise with high efficiencyMain Specification for Highway Guardrail Forming Machine    A. 5T hydraulic decoiler    1) Capacity: 5ton    2) Loading width: MAX 800mm    3) Valid expanding range for coil inner diameter: 480~520mm    4) Motor power: 5.5KW    5) Hydraulic power: 4KW    B. Main roll forming system    1) Main motor power: 37kw    2) Separate motor reducer: 750 type    3) Punching: Hydraulic pre-punching before forming,    4) Punching mould:Cr12mov,quenched 58°~62°    5) Hydraulic power: 7.5KW    6) Roller material:Gcr15 bearing steel and quench treatment hardness 58°~62°, chrome coated         0.05mm    7) Leveling rollers: 7rollers(three upper and four lower)    8) Roll forming station: 16groups    9) Diameter of main shaft: 100mm    10) Drive: Gearbox with cardan shaft    11) Raw material: Black steel or galvanized steel    12) Thickness of Raw material: 3.0-4.0mm    13) Working speed: 8m--15m/min(Exclude cutting time)    14) Length Tolerance: ±2mm    15) Cutting: Hydraulic cuttin......url:http://www.roll-formingmachine.net


Newest Auctions in Barter

Sorry! There are no "auctions" currently listed in this category. Please check back soon!